Lego Decoupage: chest of drawers

I’ve been keen on trying a bit of decoupage for a while now and saved many a pin on Pinterest to repeatedly browse through. For those of you who don’t have a clue what decoupage is (like me until recently) it’s basically a technique where you use paper or fabric to cover/decorate your furniture or other items, e.g. vases, glasses etc. I’ve saved some of my favourites on my Pinterest ‘decoupage’ board if anyone fancies a look (see below for general link to my Pinterest). At first I was a bit put off by the fact that it sounds really complicated and professional, but I gradually realised that in essence it’s gluing stuff onto other stuff.

A couple of weeks ago I took the next step by ordering some ‘Mod Podge’ on a whim from Amazon…

img_1652

This product can be used for both the bottom and top coat layers for decoupage which got the thumbs up from me. I then came across a great blog all about using Mod Podge, aptly named Mod Podge rocks. I would definitely recommend a look and especially watching the videos she has done for beginners. Then it was time to have a think about what to do for my first attempt.

A couple of months ago I found some fab Lego wrapping paper in Tesco and bought a load in preparation for Alex’s 5th birthday (my boy is Lego obsessed!) What better for a first project than to use the paper to decoupage something Lego-themed for my son? I hoped this would also slightly improve his room which currently contains hideous flowery wallpaper, hideous flowery carpets and hideous flowery curtains (that have all been there since the 70’s.) Poor boy! Also on a bit of a whim, I decided I would cover the front of some of his drawers rather than opt for something smaller and safer. It was a bit of a risk but actually the whole thing went very smoothly and this is what I ended up with…

Here’s the technique I used:

  1. Measure and cut out wrapping paper to fit drawer front.
  2. Lightly sand the drawer front to create a slightly rough surface.

img_1503

3. Paint the Mod Podge on to the drawer front (a medium-think layer using a standard paint brush.)

4. Paint the Mod Podge onto the back of the wrapping paper.

5. Carefully place the paper onto the drawer front and smooth out, making sure there are no air bubbles. The Mod Podge blog recommends using a ‘Brayer’ for this but as it was sitting in my Amazon wishlist not yet ordered I used a foam roller and my hands instead. It turned out well but I will definitely be ordering the Brayer soon for a really smooth finish now that I have got the decoupaging bug!

img_1504-1

6.Leave to dry for 15-20 minutes.

7. Apply the first top coat of Mod Podge. I did this by painting it on to the paper then using a foam roller to smooth it out as I don’t like to see brush strokes. It goes on white but dries clear and glossy (though you can buy other finishes, e.g. matt.)

 

img_1506
can you tell I was working late?!

 

8. Using a sanding block I sanded the edges to remove any remaining bits of overhanging paper and create a clean line. See this pin I saved for an example of how this works. I found it worked well but needs a bit of practice to perfect. The other option is to cut the paper to the perfect size in the first place (not generally the way I roll!)

img_1508

9. Wait again and add a couple more layers if you like. I did 3 in total then added a spray of Valspar’s clear sealer as added insurance against knocks/scrapes but this is probably overkill!

Alex loves the drawers and I am pleased as well. I’m also considering adding some proper 3D Lego bits into the mix or maybe painting the wood or papering more so this may feature in a future update. Decoupage is definitely a fun, straightforward technique which takes relatively little time and has endless possibilities so I would highly recommend it.

Thanks for reading and for anyone who doesn’t want to miss any posts please follow as they don’t all go on my Facebook. I still have my eye on painting the old chair outside now that the weather has improved so that may be my next post (but who knows, the sofa is still a possibility despite some setbacks in the testing phase!) I forgot to take a before picture this time but since I kept one drawer of each colour the same I hope I get away with it 🙂

Children’s Craft Table and Chairs: Part 1

I’m almost half way through my latest project: converting a table and chairs into a craft table using lots of colourful paint, so I thought it was a good time to share how I’ve been getting on.

Thank you to everyone who’s been reading along and a reminder to all who want to keep up to date that you can sign up for email alerts at the bottom of this page.

My 2 children have been sitting at this IKEA table for years and use it to eat at/play games on/generally make a mess. It’s been the scene of many arguments over who gets the green plate, who poked who etc. and looks very well used. I still like the table as it’s a good height for them and all the chairs tuck right under the table to save space. However, it’s also a very dull dark brown colour and generally covered in food stains and crumbs which I’ve given up trying to clean off…

 

  

Eventually we will get a new big family dining table so I thought this would be great in the new playroom (once done) as a craft table. It was probably very foolish of me to start the project too soon as they will still be eating at the table for a few months, but I had lots of ideas and was desperate to try them out. I justified it to myself by saying that it would be a good test of how well the table and chairs stand up to a LOT of wear and tear and decided to go for it.

After spending a fair bit of time in Homebase deciding on colours (in between telling off the children/trying to keep track of the children/taking the children to the toilet/wishing I was patient enough to wait until the children weren’t around), I got started on the first chair. The first job was to clean it and I made the children help to teach them valuable life lessons (they in fact thought it was the best game ever.) Then I lightly sanded it down and painted the whole thing, apart from the legs, using 2 coats of Dulux multi surfaces primer and undercoat.


Note the drop cloth, a shower curtain I bought from Poundland after seeing a tip on Pinterest. It’s much stronger than cheap drop cloths sold in shops and doesn’t bunch up like an old sheet so works perfectly.

When my husband came home he told me straight away I should have taken the chair apart first. This seemed like hard work and it was also a bit too late so I decided to ignore him (what does he know?!), did some taping up and painted everything but the seat pad in Rust-oleum satin finish furniture paint in ‘Teal’ (2 coats). I used a mini roller for this and it went on really smoothly. However,  it was at this stage that I started to regret not taking the chair apart. Yes, my husband was right and I did allow him a tiny bit of smugness (this is an extremely rare occurrence for him after all).

I left an area at the back which I taped up and painted with blackboard paint so the children can draw on it or write their names.

  
Then it was time for the real fun. Neon pink paint! (again from Rust-oleum). This generally went on well, although I learnt some lessons about tape which I’ll share later.  Here is the finished result…

  

Ta-da!!! Feeling the fear about how long it would look this lovely for, I also applied a coat of Valspar clear sealer multi-surface which I spray spray painted outside (fun!) Then I applied one coat of Rust-oleum wax.

My daughter absolutely loves the chair and has been allowed to sit on it (gently.) It’s not at the table yet but I still have 2 untouched chairs there for the children to use so am prolonging this for as long as possible.

Soon after, I got started on the second chair. The only difference here is that I used Rust-oleum chalky finish furniture paint in ‘ink blue’. As this is a chalk paint I didn’t use primer on the seat cover as I’ve read that chalk paint adheres very well to all different types of fabric (in this case faux-leather). I wanted to see this for myself as I have my eye on painting our big faux-leather sofa, again for the playroom. I haven’t persuaded the husband quite yet so for those who know me any help on this would be appreciated! I also took a few minutes to take the chair apart this time, which made all the difference to how easy it was to clean and paint. Here are the finished results…

 

  
And here are the lessons I learnt about taping:

  1. Use ‘frogtape’, which is amazing as you don’t get any leaks around the edges like you do with normal masking tape.
  2. Take the tape off AS SOON AS POSSIBLE. I’d stopped using the frog tape thinking that it was too strong, as when I peeled it off paint kept coming with it. However, this also happened even with very weak masking tape (hence quite a lot of retouching needed for the first chair.) I finally caught on that if removed fairly quickly no paint comes off and you get a really clean line. Result!

And so the project is half done with not too many DIWHY?? disasters. Except…I did find a can of paint had  leaked all over the plastic box it was in  and its contents, which meant a very quick clean up of a lot of paint and going to work with ‘teal’ hands. I also can’t seem to stop picking up a paintbrush without changing first (can’t fight the laziness) so I bought this creation from Poundland…

 

I feel a bit like Dexter in it but otherwise it seems to do the job.

Here’s what I used for the project…

 

Guess which one leaked?!

Watch this space for the finished result and let me know what you think about the sofa painting!

TV Cabinet/sideboard stencil and border

As you may remember, I wanted to improve on my TV cabinet repaint by doing a little something extra to make it stand out. This inevitably led to DI-WHY?? (stencil-style) but after some rework and a bit of practise I am really pleased with the results. This…

img_0717

Now looks like this…

FullSizeRender.jpg

Much improved I think!

When I finally got the stencilling right the doors looked like this…

I was fairly pleased but still felt like something was missing and decided to try to do a border around the doors to frame the stencil pattern. Knowing I don’t have the steadiest of hands I did some research and ordered a ‘paint pen’ in grey (never knew these existed before). I edged one cupboard door, did a bit of comparison…

And decided I liked it so got to work.

Initially I thought this would be a fairly quick job, but the more ‘edges’ I lined with the paint pen the more edges I saw that looked like they needed edging and then the top looked bare, then the sides, etc. etc. so I just kept going.  I even turned down a glass of wine to keep my hands as steady as possible (people who know me are probably now in shock.) At first my lines were a bit wobbly but the more I did the quicker and steadier I got. Also, the best thing about the pen is that it takes a while to dry and can be wiped away with a bit of kitchen roll and water very easily when a mistake is made (lots of slips and wobbles were made by me, despite the lack of wine!) The only thing I’m not sure on is how well it will stand up to daily wear and tear.

Here’s the obligatory ‘before and after’…

  And another close up of the cupboard doors.

I’m pleased with the final result and can see it looking even better with the right walls, carpet and accessories. I’d love to know what you think? I would also definitely stencil again, and will probably be buying lots more paint pens in different colours.

I’m currently working on a new project: repainting some chairs and a table in bright colours (hooray!) to eventually be used as a craft table for the kids. Watch this space! Here’s what I used for this project…

IMG_1012.JPG