Lego storage box

Following my Lego Decoupage: chest of drawers project I caught the Lego bug  and decided to use some of the leftover wrapping paper I had to decorate a basic storage box for my son. He got a lot of Lego for his birthday so more storage was seriously needed. I bought a basic box from B&Q to ‘do up’, fondly hoping that maybe a fun, colourful box would encourage Alex to leave less Lego on the floor and to tidy it all neatly away instead (3 guesses how that one turns out!) This is the box I bought (with a black lid) as I wanted it to be quite sturdy and to be able to secure the top.

img_3864-1

I painted ‘Mod Podge’ in gloss onto the box then added the paper, left it to dry and did 2 top coats leaving 20 minutes of drying time between each (as I did with the chest of drawers). Because it’s just for storage I didn’t worry too much about how well the paper overlapped or matched up. Once I’d finished that I decided to paint the lid and top of the main box blue to make it look a bit cheerier. I used some left-over Rust-Oleum chalk finish paint in ‘ink blue’. For the finishing touch I stuck a little more paper across the handle and here is the finished result:

img_3861img_3862img_3863

It definitely looks more cheerful and now houses all of Alex’s Lego train set bits to hopefully keep it in one place. The rest of the Lego still spends most of its time on the floor waiting to attack my feet!

In other news, building works have finally started on our extension – hooray!! The foundations are done so actual building will begin soon. In a few weeks I will hopefully have at least one lovely room and somewhere to take photos of my projects without scary carpets/wallpaper and curtains in the background. My Pine Chest of Drawers Makeover has also been doing well on Pinterest with over 100 pins now and it’s lovely to think that hopefully there are other people out there getting inspiration to do some furniture painting.

I have started work on the Jack and Jill chairs in the garden as well. Unfortunately the first chair took me a lot longer than I thought so only one half of the chair set is done. The builders have since taken over the garden and are now hogging the chair for their breaks!

img_3871

This will be a good test of how durable it is but I think it might be a while before I’m able to get the whole thing finished. Watch this space!

Here’s what I used for the storage box…

img_3867

Lego Decoupage: chest of drawers

I’ve been keen on trying a bit of decoupage for a while now and saved many a pin on Pinterest to repeatedly browse through. For those of you who don’t have a clue what decoupage is (like me until recently) it’s basically a technique where you use paper or fabric to cover/decorate your furniture or other items, e.g. vases, glasses etc. I’ve saved some of my favourites on my Pinterest ‘decoupage’ board if anyone fancies a look (see below for general link to my Pinterest). At first I was a bit put off by the fact that it sounds really complicated and professional, but I gradually realised that in essence it’s gluing stuff onto other stuff.

A couple of weeks ago I took the next step by ordering some ‘Mod Podge’ on a whim from Amazon…

img_1652

This product can be used for both the bottom and top coat layers for decoupage which got the thumbs up from me. I then came across a great blog all about using Mod Podge, aptly named Mod Podge rocks. I would definitely recommend a look and especially watching the videos she has done for beginners. Then it was time to have a think about what to do for my first attempt.

A couple of months ago I found some fab Lego wrapping paper in Tesco and bought a load in preparation for Alex’s 5th birthday (my boy is Lego obsessed!) What better for a first project than to use the paper to decoupage something Lego-themed for my son? I hoped this would also slightly improve his room which currently contains hideous flowery wallpaper, hideous flowery carpets and hideous flowery curtains (that have all been there since the 70’s.) Poor boy! Also on a bit of a whim, I decided I would cover the front of some of his drawers rather than opt for something smaller and safer. It was a bit of a risk but actually the whole thing went very smoothly and this is what I ended up with…

Here’s the technique I used:

  1. Measure and cut out wrapping paper to fit drawer front.
  2. Lightly sand the drawer front to create a slightly rough surface.

img_1503

3. Paint the Mod Podge on to the drawer front (a medium-think layer using a standard paint brush.)

4. Paint the Mod Podge onto the back of the wrapping paper.

5. Carefully place the paper onto the drawer front and smooth out, making sure there are no air bubbles. The Mod Podge blog recommends using a ‘Brayer’ for this but as it was sitting in my Amazon wishlist not yet ordered I used a foam roller and my hands instead. It turned out well but I will definitely be ordering the Brayer soon for a really smooth finish now that I have got the decoupaging bug!

img_1504-1

6.Leave to dry for 15-20 minutes.

7. Apply the first top coat of Mod Podge. I did this by painting it on to the paper then using a foam roller to smooth it out as I don’t like to see brush strokes. It goes on white but dries clear and glossy (though you can buy other finishes, e.g. matt.)

 

img_1506
can you tell I was working late?!

 

8. Using a sanding block I sanded the edges to remove any remaining bits of overhanging paper and create a clean line. See this pin I saved for an example of how this works. I found it worked well but needs a bit of practice to perfect. The other option is to cut the paper to the perfect size in the first place (not generally the way I roll!)

img_1508

9. Wait again and add a couple more layers if you like. I did 3 in total then added a spray of Valspar’s clear sealer as added insurance against knocks/scrapes but this is probably overkill!

Alex loves the drawers and I am pleased as well. I’m also considering adding some proper 3D Lego bits into the mix or maybe painting the wood or papering more so this may feature in a future update. Decoupage is definitely a fun, straightforward technique which takes relatively little time and has endless possibilities so I would highly recommend it.

Thanks for reading and for anyone who doesn’t want to miss any posts please follow as they don’t all go on my Facebook. I still have my eye on painting the old chair outside now that the weather has improved so that may be my next post (but who knows, the sofa is still a possibility despite some setbacks in the testing phase!) I forgot to take a before picture this time but since I kept one drawer of each colour the same I hope I get away with it 🙂